Welcome visitor you can login or create an account.

Contact Atom Adhesives toll free (888) 522-6742

AA-BOND F114 Optically Clear, blush-free, low viscosity F 114 Fiber-Optic (glass and plastic) Optical Potting

AA-BOND F114 Optically Clear, blush-free, low viscosity F 114  Fiber-Optic (glass and plastic) Optical Potting
Product Code: AA-BOND F114
Availability: In Stock
This product has a minimum quantity of 1


Click here for printer friendly version.

Technical Product Bulletin

OPTICAL POTTINGAPPLICATIOON EPOXY ADHESIVE


PRODUCT DESCRIPTION:

AA-BOND F114 is an optically clear adhesive developed for bonding and small volume potting of plastic or glass optical fibers, lenses and prisms, LED displays and other optical components. Formulation offset to:

Hysol TRA-BOND F114

LOCTITE ECCOBOND F 114

PRODUCT PROPERTIES:

Appearance Clear
Cure Type Heat cure or Room Temperature
Benefits Low viscosity
easily mixed
resistance to salt solutions, mild acids and alkalis, petroleum solvents, lubricating oils and alcohol.
Mix Ratio by weight 100:50/ Resin: Hardener

Typical Applications

Substrates:Most metals, Ceramic, Glass and Plastics

Fiber optic assembly, Lens assembly, Prism assembly and Optical potting

UNCURED PROPERTIES:

Viscosity @ 25 °C, cps 1,500 (After Mixing)
@ temperature 77.0 °F, 25.0 °C
Thixotropic Index 1.52
Specific Gravity, mixed 1.1
Reactive solids contents, % 100
Pot Life 45 minutes

CURE SCHEDULE:

4 Hours @ 65°C
24 Hours @ 25°C

CURED PROPERTIES:

Hardness, Shore D 84
Dielectric strength volts/mil 410

ELECTRICAL PROPERTIES:

Volume Resistivity, ohm-cm @ 25ºC 6.00×10^13
Dielectric Constant

THERMAL PROPERTIES:

Operating Temperature - 60to 130°C

GENERAL INFORMATION:

For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS).

HOW TO USE:

1) Carefully clean and dry all surfaces to be bonded.

2) Apply AA-BOND F 114completely mixed adhesive to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds; however, maintain contact until adhesive is completely cured.

3) Some separation of components is common during shipping and storage. For this reason, it is recommended that the contents of the shipping container be thoroughly mixed prior to use.

4) Some ingredients in this formulation provided may crystallize when subjected to low temperature storage. A gentle warming cycle of 52°C for 30 minutes prior to mixing components may be necessary. Crystallized epoxy components do not react as well as liquid components and should be re-dissolved prior to use for best results.

AVAILABILITY:

This epoxy can be supplied in various different packages.

Data Sheets: TDS | MSDS available upon request.


Write a review

Note: HTML is not translated!




Designed By TechBowie
AtomAdhesives © 2019
Live Chat