Welcome visitor you can login or create an account.

Contact Atom Adhesives toll free (888) 522-6742

AA-DUCT X1 Electrically Conductive Silver Filled Adhesive Thermally Conductive Silver Epoxy Fast dry 4 hours

AA-DUCT X1 Electrically Conductive Silver Filled Adhesive Thermally Conductive Silver Epoxy Fast dry 4 hours
Product Code: AA-DUCT X1
Availability: In Stock
This product has a minimum quantity of 1


Click here for printer friendly version.


Technical Product Bulletin

Electrically Conductive Silver Filled Adhesive Thermally Conductive Silver Epoxy Fast dry 4 hours


PRODUCT DESCRIPTION:

AA-DUCT X1 is a two parts electrically and thermally conductive epoxy specially designed for fast 4 hour cure time. It has a work time of 5 minutes therefore the mixing and application must be performed quickly, This product is characterized by a wide operating temperature range from –20 to +200°F. Electro-Bond X1 is recommended for thermal and electrical application for production environments due to its faster bodning time and excellent shear strength.

GENERAL PROPERTIES

Appearance Silver
Cure Type Heat cure and Room temperature
Benefits Free of solvents and copper or carbon additives
Coatings between many different and dissimilar materials
Mix Ratio by weight 90:100 / Resin:Hardener
Substrates Metal, ceramics, glass and plastic
Typical Application Assembly and repair of electrical modules, flexible circuits, membrane switches, wave guides, flat cable and high frequency shields
Electronic bonding, coating, and sealing applications
Can be used as a flexible "cold-solder"

CURE SCHEDULE

2 to 4 hours @ 25°C
10 minutes @ 60°C

UNCURED PROPERTIES

Specific Gravity, mixed 2.64 g/cc
Pot Life 6 min
Solid Content 100 %
Viscosity Paste

MISC PROPERTIES

Hardness, Shore D 83
Adhesive Bond Strength
Lap shear, alum to alum
9400

ELECTRICAL PROPERTIES

Volume Resistivity 1.00 E-03

THERMAL PROPERTIES

Operating Temperature From -20 to +200°F
Glass Transition Temp, Tg 60

GENERAL INFORMATION:

For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS).

HOW TO USE:

1) Carefully clean and dry all surfaces to be bonded. Please mix thoroughly and be ready to apply as the product begins to dry within 3 to 5 minutes.

2) Apply AA-DUCT X1 completely mixed adhesive to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds; however, maintain contact until adhesive is completely cured.

3) Some separation of components is common during shipping and storage. For this reason, it is recommended that the contents of the shipping container be thoroughly mixed prior to use.

4) Some ingredients in this formulation provided may crystallize when subjected to low temperature storage. A gentle warming cycle of 52°C for 30 minutes prior to mixing components may be necessary. Crystallized epoxy components do not react as well as liquid components and should be re-dissolved prior to use for best results.

AVAILABILITY:

This epoxy can be supplied in various different packages.

Data Sheets: TDS | MSDS available upon request.


Write a review

Note: HTML is not translated!




Designed By TechBowie
AtomAdhesives © 2017
Live Chat