Welcome visitor you can login or create an account.

Contact Atom Adhesives toll free (888) 522-6742

Wood-Bond Highest Strength Industrial Grade Epoxy Adhesive Hardens Within 24 hours

Wood-Bond Highest Strength Industrial Grade Epoxy Adhesive Hardens Within 24 hours
Product Code: Wood-Bond Highest Strength (28)
Availability: In Stock
This product has a minimum quantity of 1

Click here for printer friendly version.

Technical Product Bulletin

Wood-Bond 24 Epoxy Adhesive Strongest Bonding Agent 24 hour Adhesion


Wood-Bond is a two part, heat-resistant and low exotherm, epoxy adhesive formulation. It is a 100% solid epoxy adhesive, with superior chemical resistance and shear strength.

Wood-Bond contains a thixotrophic agent which impedes thinning out of the material during heat cure when properly mixed and cured.


Appearance Amber
Cure Type Room temperature or Heat Cure
Benefits Room temperature or Heat Cure
Tough enamel like cure
Bonds to a variety of substrates
Weather resistant
Mix Ratio by weight 100:100 / Resin:Hardener
Substrates Metals, glass, Woods, wood and many plastics
Operating Temperature -60 to 163 °C
Typical Application(s) Staking components, bonding, laminating and repair applications


Specific Gravity, mixed 1.07
Reactive solids contents, % 100
Pot Life 60 minutes


4 to 6 hours @ 65°C
24 hours @ 25°C


Shelf Life 2 years closed packaging
Glass Transition Temp, Tg 93°C
Hardness, Shore D 78
Lap shear 2900 psi (Alum to Alum)


For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS).


1) Carefully clean and dry all surfaces to be bonded.

2) Apply Wood-Bond completely mixed adhesive to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds; however, maintain contact until adhesive is completely cured.

3) Some separation of components is common during shipping and storage. For this reason, it is recommended that the contents of the shipping container be thoroughly mixed prior to use.

4) Some ingredients in this formulation provided may crystallize when subjected to low temperature storage. A gentle warming cycle of 52°C for 30 minutes prior to mixing components may be necessary. Crystallized epoxy components do not react as well as liquid components and should be re-dissolved prior to use for best results.


This epoxy can be supplied in various different packages.

Data Sheets: TDS | MSDS available upon request.

Write a review

Note: HTML is not translated!

Designed By TechBowie
AtomAdhesives © 2020
Live Chat