Welcome visitor you can login or create an account.

Contact Atom Adhesives toll free (888) 522-6742

AA-BOND FDA 26 FDA Grade Thermally Conductive Epoxy

AA-BOND FDA 26 FDA Grade Thermally Conductive Epoxy
Product Code: AA-BOND FDA26
Availability: In Stock
This product has a minimum quantity of 1

Click here for printer friendly version.

Technical Product Bulletin

FDA Grade Thermally Conductive Epoxy Adhesive


AA-BOND FDA26 is Versatile adhesive guaranteed a high strength bond.

AA‐BOND FDA26 is two part adhesive used and cured at room temperature for bonding, repair applications by manufacturers of food preparation, processing and packaging equipment and devices.


Appearance Grey
Cure Type Heat cure or Room temperature
Benefits Excellent durability
High shear and peel strength
Heat and impact resistant
Handy duo-pack cartridges for easy mixing
Mix Ratio by weight 100:14/ Resin:Hardener
Substrates Most metals, ceramic, glass and plastics
Operating Temperatures -60 to 135 °C


Viscosity @ 25 °C, cps 17,500 ±1000 @ temperature 77 °F, 25 °C
Specific Gravity, mixed 2.36
Reactive solids contents, % 100
Pot Life 50 minutes


1-4 Hours @ 65°C
24 Hours @ 25°C


Adhesive Bond Strength, psi 2120 ( 1 hr @ 65°C)
2190 (24 hrs @ 25°C)
Hardness, Shore D 86 (24 HR @ 25°C)
90 (1 hr @ 65°C)


Glass transition temperature (Tg) 113°C, 235 °F


For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS).


1) Carefully clean and dry all surfaces to be bonded.

2) Apply AA-BOND FDA26 completely mixed adhesive to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds; however, maintain contact until adhesive is completely cured.

3) Some separation of components is common during shipping and storage. For this reason, it is recommended that the contents of the shipping container be thoroughly mixed prior to use.

4) Some ingredients in this formulation provided may crystallize when subjected to low temperature storage. A gentle warming cycle of 52°C for 30 minutes prior to mixing components may be necessary. Crystallized epoxy components do not react as well as liquid components and should be re-dissolved prior to use for best results.


This epoxy can be supplied in various different packages.

Data Sheets: TDS | MSDS available upon request.

Write a review

Note: HTML is not translated!

Designed By TechBowie
AtomAdhesives © 2020
Live Chat