Welcome visitor you can login or create an account.

Contact Atom Adhesives toll free (888) 522-6742

AA-BOND F162 High Temp, Fast Cure, Low Visc, 2 Part Fiberoptics Epoxy Ahesive

AA-BOND F162 High Temp, Fast Cure, Low Visc, 2 Part Fiberoptics Epoxy Ahesive
Product Code: AA-BOND F162
Availability: In Stock
This product has a minimum quantity of 1

Click here for printer friendly version.

Technical Product Bulletin



AA-BOND F162 is a thixotropic electrical insulating epoxy adhesive system with low vapor pressure and outgassing characteristics.

AA-BOND F162 was specifically developed for fiber optic, laser, photonic and electronic applications requiring excellent electrical insulation in combination with effective thermal dissipation from heat-producing components.

AA-BOND F162 is two-part epoxy compound develops strong, durable, stable, high impact thermally conductive bonds at room temperature, and adheres readily to itself, and to metals, many plastics, silica, steatite, alumina, sapphire and other ceramics, glass, and to many other materials.

AA-BOND F162 provides excellent resistance to salt solutions, mild acids and alkalis and many other chemicals including petroleum solvents, lubricating oils and alcohol.


Appearance Ligh grey/off white
Cure Type Room Temperature or Heat cure
Benefits Smooth paste
Fiber optic
Photonic and electronic applications
Good electrical insulation
Mix Ratio by weight 100:10 / Resin:Hardener
Substrates Metals, Many plastics, Glass, and other materials
Operating Temperature -60 to 120 °C
Typical Applications ALL types of fiber-optic connectors as well as LED displays, lenses and other optical components.


Viscosity @ 25 °C Paste
Thixotropic Index 1.0
Specific Gravity, mixed, g/cc 2.29


2-4 hours @ 65°C
24 hours @ 25°C
Volume Resistivity 2.10e+15 ohm-cm
Dielectric Constant 5.9 @ Frequency 1000 Hz
Dielectric Strength 16.1 kV/mm 410 kV/in
Dissipation Factor 0.010 @ Frequency 1000 Hz


Thermal Conductivity 6.09 BTU-in/hr-ft²-°F
Hardness, Shore D 88


For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS).


1) Carefully clean and dry all surfaces to be bonded.

2) Apply AA-BOND F162 completely mixed adhesive to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds; however, maintain contact until adhesive is completely cured.

3) Some separation of components is common during shipping and storage. For this reason, it is recommended that the contents of the shipping container be thoroughly mixed prior to use.

4) Some ingredients in this formulation provided may crystallize when subjected to low temperature storage. A gentle warming cycle of 52°C for 30 minutes prior to mixing components may be necessary. Crystallized epoxy components do not react as well as liquid components and should be re-dissolved prior to use for best results.


This epoxy can be supplied in various different packages.

Data Sheets: TDS | MSDS available upon request.

Write a review

Note: HTML is not translated!

Designed By TechBowie
AtomAdhesives © 2018
Live Chat