Welcome visitor you can login or create an account.

Contact Atom Adhesives toll free (888) 522-6742

AA-BOND F112 Fiber Optic Epoxy Adhesive, Two Part, Long Pot Life, Impact Resistant

AA-BOND F112 Fiber Optic Epoxy Adhesive, Two Part, Long Pot Life, Impact Resistant
Product Code: AA-BOND F112
Availability: In Stock
This product has a minimum quantity of 1

Click here for printer friendly version.

Technical Product Bulletin



AA-BOND F112 is an impact resistant, fiber-optic adhesive.

AA-BOND F112 is two-part, low viscosity epoxy has the distinct advantage of remaining below 3000 cps for a minimum of 40 minutes.

AA-BOND F112 allows more connectors to be produced from one mix. Low stress, AA-BOND F112 is an excellent choice for multimode connectors and single mode connectors where excessive curing temperatures may cause cracking.

AA-BOND F112 can be cured at room temperature overnight or as fast as 15 minutes at 90°C. The blue color facilitates easy polishing and its cured properties prevent pistoning. This product is a 100% solid system that can be used for small potting and sealing applications where resistance to thermal shock and impact are required.


Appearance Blue
Components 2 component - requires mixing
Mix Ratio by weight 100:30 / Resin:Hardener
Benefits Low viscosity
Thermal shock and impact resistant
Low stress connections
Cure Type Room temperature or Heat Cure
Operating Temperature -60 to 100 °C
Typical Applications Fiber optic assembly, multimode and single mode connectors, small potting and sealing applications


Viscosity @ 25 °C 2300
Thixotropic Index 1.0
Specific Gravity, cured 1.2
Pot Life 30 minutes


24 hours @ 25°C
1 hour @ 65°C
15 minutes @ 90°C


Glass Transition Temperature (Tg), ultimate, °C 102
Hardness, Shore D 85
Refractive Index 1.51
Water Absorption , after 24 hours saturation, % 0.07


For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS).


1) Carefully clean and dry all surfaces to be bonded.

2) Apply AA-BOND F112 completely mixed adhesive to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds; however, maintain contact until adhesive is completely cured.

3) Some separation of components is common during shipping and storage. For this reason, it is recommended that the contents of the shipping container be thoroughly mixed prior to use.

4) Some ingredients in this formulation provided may crystallize when subjected to low temperature storage. A gentle warming cycle of 52°C for 30 minutes prior to mixing components may be necessary. Crystallized epoxy components do not react as well as liquid components and should be re-dissolved prior to use for best results.


This epoxy can be supplied in various different packages.

Data Sheets: TDS | MSDS available upon request.

Write a review

Note: HTML is not translated!

Designed By TechBowie
AtomAdhesives © 2018
Live Chat