Welcome visitor you can login or create an account.

Contact Atom Adhesives toll free (888) 522-6742

AA-BOND FDA2T Food & Drug Administration Medical Grade Epoxy Adhesive, Room Temp Cure

AA-BOND FDA2T Food & Drug Administration Medical Grade Epoxy Adhesive, Room Temp Cure
Product Code: AA-BOND FDA2T
Availability: In Stock
This product has a minimum quantity of 1


Click here for printer friendly version.


Technical Product Bulletin

FOOD AND DRUG APPLICATIOON EPOXY ADHESIVE


PRODUCT DESCRIPTION:

AA-BOND FDA2T is a thixotropic epoxy resin system specifically developed for medical device applications. It has been tested in accordance with USP biological reactivity tests, in vivo and received Class VI approval.

AA-BOND FDA2T is an effective electrical insulator, and it provides low permeability to gases and vapors and good resistance to water, weather, lubricants and fuels, to mild acids and alkalis, and many other organic and inorganic compounds.

PRODUCT PROPERTIES:

Appearance Amber
Cure Type Heat cure or Room Temperature
Benefits Medium viscosity
Electrically Insulating
Low permeability to gases and vapors
Low temperature cure
Mix Ratio by weight 100:93 / Resin: Hardener
Typical Applications Medical, Food preparation processing and packaging

UNCURED PROPERTIES:

Viscosity @ 25 °C, cps 25000 ±1000
Specific Gravity, mixed 1.119
Pot Life 3 hours

CURE SCHEDULE:

1 to 4 Hours @ 65°C
24 Hours @ 25°C

THERMAL PROPERTIES:

CTE, linear 29.4 µin/in-°F @ temperature 68 °F
Glass Transition Temp, Tg 70.0 °C, 158 °F
Operating Temperature -70 to 145 °C

CURED PROPERTIES:

Coefficient of Thermal Expansion, cm/cm/ºC 5.30×10-05
Hardness, Shore D 79
Elongation at Yield 9.0 %
Adhesive Bond Strength 1800 psi

ELECTRICAL PROPERTIES:

Volume Resistivity 1.20e+14 ohm-cm
Dielectric Constant 3.4 @ frequency 1000 Hz
Dielectric Strength 420 kV/in
Dissipation Factor 0.020

GENERAL INFORMATION:

For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS).

HOW TO USE:

1) Carefully clean and dry all surfaces to be bonded.

2) Apply AA-BOND FDA2T completely mixed adhesive to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds; however, maintain contact until adhesive is completely cured.

3) Some separation of components is common during shipping and storage. For this reason, it is recommended that the contents of the shipping container be thoroughly mixed prior to use.

4) Some ingredients in this formulation provided may crystallize when subjected to low temperature storage. A gentle warming cycle of 52°C for 30 minutes prior to mixing components may be necessary. Crystallized epoxy components do not react as well as liquid components and should be re-dissolved prior to use for best results.

AVAILABILITY:

This epoxy can be supplied in various different packages.

Data Sheets: TDS | MSDS available upon request.


Write a review

Note: HTML is not translated!




Designed By TechBowie
AtomAdhesives © 2019
Live Chat