AA-BOND FDA16 is a medium viscosity epoxy resin system specifically developed for medical device applications.
AA-BOND FDA16 has been tested in accordance with USP biological reactivity tests, in vivo and received Class VI approval.
Mix Ratio, by weight
100:33 / Resin:Hardener
class VI approved
Heat cure or Room temperature
Bonding, laminating and repair applications by manufacturers of food preparation, processing and packaging equipment, and by manufacturers of catheters, hearing aids, dental products and other biomedical instruments and devices.
Viscosity @ 25 °C, cps
4,700 @ temperature 77°F, 25°C
Specific Gravity, cured
Volatile Organic Compounds (VOC) Content
Water Absorption , after 24 HR saturation, %
Lap Shear Strength alum to alum
2,100 24 HR @ 25°C
3300 4 HR @ 65°C
Hardness, Shore D
86 4 hrs @ 65°C
75 24 hrs @ 25°C
1 – 4 hours
29.4 µin/in-°F @ temperature 68.0 °F
Glass Transition Temp, Tg
97.0 °C, 207 °F
-70 to 145 °C
For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS).
HOW TO USE:
1) Carefully clean and dry all surfaces to be bonded.
2) Apply AA-BOND FDA16 completely mixed adhesive to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds; however, maintain contact until adhesive is completely cured.
3) Some separation of components is common during shipping and storage. For this reason, it is recommended that the contents of the shipping container be thoroughly mixed prior to use.
4) Some ingredients in this formulation provided may crystallize when subjected to low temperature storage. A gentle warming cycle of 52°C for 30 minutes prior to mixing components may be necessary. Crystallized epoxy components do not react as well as liquid components and should be re-dissolved prior to use for best results.
This epoxy can be supplied in various different packages.