AA-BOND FDA2T is a thixotropic epoxy resin system specifically developed for medical device applications. It has been tested in accordance with USP biological reactivity tests, in vivo and received Class VI approval.
AA-BOND FDA2T is an effective electrical insulator, and it provides low permeability to gases and vapors and good resistance to water, weather, lubricants and fuels, to mild acids and alkalis, and many other organic and inorganic compounds.
Heat cure or Room Temperature
Low permeability to gases and vapors
Low temperature cure
Mix Ratio by weight
100:93 / Resin: Hardener
Medical, Food preparation processing and packaging
Viscosity @ 25 °C, cps
Specific Gravity, mixed
1 to 4 Hours
29.4 µin/in-°F @ temperature 68 °F
Glass Transition Temp, Tg
70.0 °C, 158 °F
-70 to 145 °C
Coefficient of Thermal Expansion, cm/cm/ºC
Hardness, Shore D
Elongation at Yield
Adhesive Bond Strength
3.4 @ frequency 1000 Hz
For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS).
HOW TO USE:
1) Carefully clean and dry all surfaces to be bonded.
2) Apply AA-BOND FDA2T completely mixed adhesive to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds; however, maintain contact until adhesive is completely cured.
3) Some separation of components is common during shipping and storage. For this reason, it is recommended that the contents of the shipping container be thoroughly mixed prior to use.
4) Some ingredients in this formulation provided may crystallize when subjected to low temperature storage. A gentle warming cycle of 52°C for 30 minutes prior to mixing components may be necessary. Crystallized epoxy components do not react as well as liquid components and should be re-dissolved prior to use for best results.
This epoxy can be supplied in various different packages.