Welcome visitor you can login or create an account.

Contact Atom Adhesives toll free (888) 522-6742

AA-BOND FDA2 Food & Drug Administration Medical Grade Epoxy Adhesive, Room Temp Cure

AA-BOND FDA2 Food & Drug Administration Medical Grade Epoxy Adhesive, Room Temp Cure
Product Code: AA-BOND FDA2
Availability: In Stock
This product has a minimum quantity of 1


Click here for printer friendly version.


Technical Product Bulletin

FOOD AND DRUG APPLICATION EPOXY ADHESIVE


PRODUCT DESCRIPTION:

AA-BOND FDA2 is a medium viscosity epoxy resin system specifically developed for medical device applications. It has been tested in accordance with USP biological reactivity tests, in vivo and received Class VI approval.

AA-BOND FDA2 is two part amber adhesive used and cured at room temperature for bonding, laminating and repair applications by manufacturers of food preparation, processing and packaging equipment and devices.

AA-BOND FDA2 provides low permeability to gases and vapors, and good resistance to water, weather, petroleum solvents, lubricants, to mild acids and alkalis, and to many other organic and inorganic compounds.

GENERAL PROPERTIES

Appearance Amber
Cure Type Heat cure or Room Temperature
Benefits Medium viscosity
Class VI approved
Easily mixed
Low permeability
Good resistance
Mix Ratio by weight 100:100 / Resin:Hardener
Substrates Most metals, ceramic, glass and plastics
Operating Temperature -70 to 145 °C
Typical Applications Bonding, laminating and repair applications by manufacturers of food preparation, processing and packaging equipment, and by manufacturers of catheters, hearing aids, dental products and other biomedical instruments and devices.
Minimum Service Temperature, Air -94 °F

UNCURED PROPERTIES:

Viscosity @ 25 °C 14,000 ±2000
Specific Gravity, mixed 1.11
Reactive solids contents, % 100
Pot Life 45 minutes

CURE SCHEDULE:

1-4 hours @ 65°C
24 hours @ 25°C

CURED PROPERTIES:

Glass transition temperature (Tg), °C 54
Hardness, Shore D 79
Dielectric strength volts/mil 420
Water Absorption, % .004
Lap shear strength, psi 2700 (Aluminum to Aluminum)
Volume Resistivity 1.20e+14 ohm-cm
Dielectric Constant 3.4 @ Frequency 1000 Hz
Dissipation Factor 0.020 @ Frequency 1000 Hz

GENERAL INFORMATION:

For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS).

HOW TO USE:

1) Carefully clean and dry all surfaces to be bonded.

2) Apply AA-BOND FDA2 completely mixed adhesive to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds; however, maintain contact until adhesive is completely cured.

3) Some separation of components is common during shipping and storage. For this reason, it is recommended that the contents of the shipping container be thoroughly mixed prior to use.

4) Some ingredients in this formulation provided may crystallize when subjected to low temperature storage. A gentle warming cycle of 52°C for 30 minutes prior to mixing components may be necessary. Crystallized epoxy components do not react as well as liquid components and should be re-dissolved prior to use for best results.

AVAILABILITY:

This epoxy can be supplied in various different packages.

Data Sheets: TDS | MSDS available upon request.


Write a review

Note: HTML is not translated!




Designed By TechBowie
AtomAdhesives © 2019
Live Chat