Welcome visitor you can login or create an account.

Contact Atom Adhesives toll free (888) 522-6742

AA-BOND F113 High Impact Optically Clear Epoxy Adhesive, Two part, Low Viscosity

AA-BOND F113 High Impact Optically Clear Epoxy Adhesive, Two part, Low Viscosity
Product Code: AA-BOND F113
Availability: In Stock
This product has a minimum quantity of 1

Click here for printer friendly version.

Technical Product Bulletin



AA-BOND F113 is an Optically Clear, low viscosity , High impact epoxy adhesives developed for bonding and small volume potting of plastic or glass optical fibers, lenses and prisms, LED displays, and other optical components.

AA-BOND F113 is recommended for laminating, bonding, and sealing applications where excellent wetting, good pot life and improved impact strength properties are required.

AA-BOND F113 is two parts adhesive easily mixed and cured at room temperature and develops strong bond to glass and glass fibers, ceramics, many metals and most rigid plastics.

AA-BOND F113 bonds offer resistance to mechanical impact and thermal shock, and is also resistant to weather, water, gases and vapors, petroleum products, and mild acids and alkalis.


Appearance Clear
Components 2 component - requires mixing
Mix Ratio by weight 100:30 / Resin:Hardener
Benefits Low viscosity
Thermal shock and impact resistant
Low stress connections
Cure Type Room temperature or Heat Cure
Operating Temperature -60 to 120 °C
Typical Applications Fiber optic assembly, multimode and single mode connectors, small potting and sealing applications


Viscosity @ 25 °C 175
Thixotropic Index 1.0
Specific Gravity 1.23
Pot Life 1.5 hours


24 hours @ 25°C
1-2 hours @ 65°C


Coefficient of Thermal Expansion, cm/cm/ºC 6.20×10+01
Glass Transition Temperature (Tg), ultimate, °C 102
Hardness, Shore D 86
Refractive Index 1.51
Water Absorption , after 24 hours saturation, % 0.07


For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS).


1) Carefully clean and dry all surfaces to be bonded.

2) Apply AA-BOND F113 completely mixed adhesive to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds; however, maintain contact until adhesive is completely cured.

3) Some separation of components is common during shipping and storage. For this reason, it is recommended that the contents of the shipping container be thoroughly mixed prior to use.

4) Some ingredients in this formulation provided may crystallize when subjected to low temperature storage. A gentle warming cycle of 52°C for 30 minutes prior to mixing components may be necessary. Crystallized epoxy components do not react as well as liquid components and should be re-dissolved prior to use for best results.


This epoxy can be supplied in various different packages.

Data Sheets: TDS | MSDS available upon request.

Write a review

Note: HTML is not translated!

Designed By TechBowie
AtomAdhesives © 2019
Live Chat