Welcome visitor you can login or create an account.

Contact Atom Adhesives toll free (888) 522-6742

AA-BOND EP30AN LOW VISCOSITY THERMALLY CONDUCTIVE ELECTRICALLY INSULATING EPOXY COMPOUND

AA-BOND EP30AN LOW VISCOSITY  THERMALLY CONDUCTIVE ELECTRICALLY INSULATING EPOXY COMPOUND
Product Code: AA-BOND EP30AN
Availability: In Stock
This product has a minimum quantity of 1


Click here for printer friendly version.

PRODUCT DESCRIPTION:

AA-BOND EP30AN is a two part epoxy for high performance potting, sealing, coating and bonding which improve heat transfer while maintaining electrical insulation. This is an alternative better pricedoffset formulation to -Master Bond® EP30AN.

AA-BOND EP30AN will cure at room temperature or more rapidly at elevated temperatures.

AA-BOND EP30AN is an excellent adhesive/sealant forming durable, rigid bonds that resist to thermal cycling and chemicals including water, oils, etc. over the wide temperature range of -55°F to 245°F. The coefficient of thermal expansion is low.

AA-BOND EP30AN is used in applications where thermal conductivity, electrical isolation properties are required.

AA-BOND EP30AN bonds to itself and to metals, silica, alumina, others ceramics, glass, plastics and many other materials.

GENERAL PROPERTIES:

Appearance

Grey

Curing

Room temperature or Heat cure

Benefits

· Strong

· Resist thermal cycling

· Durable

· High impact bonds at room temperature

Mix Ratio by weight

100:10 / Resin: Hardener

Typical Application

Low viscosity for potting application

Good gap filling

High adhesive strength

Good thermal conductivity

UNCURED PROPERTIES:

Specific Gravity, mixed

2.44

Reactive solids contents, %

100

Pot Life

30 minutes

Shelf life

1 Year

THERMAL PROPERTIES:

CTE, linear

15.0µin/in-°F
@Temperature 68.0 °F

Thermal Conductivity

6.94BTU-in/hr-ft²-°F

Operating Temperature

-55 to 245 °F

CURED PROPERTIES:

Hardness, Shore D

89

Dielectric strength, volts/mil

420

CURE SCHEDULE:

2 – 4 Hours

@ 65°C

24 Hours

@ 25°C

ELECTRICAL PROPERTIES:

Volume Resistivity

5.50e+14 ohm-cm

4.00e+13ohm-cm
@Temperature 212 °F

Dielectric Constant

6.2
@Frequency 1000 Hz

Dielectric Strength

420volts/mil

GENERAL INFORMATION:

For safe handling information on this product, consult the Safety Data Sheet (SDS).

HOW TO USE:

1. Carefully clean and dry all surfaces to be bonded.

2. Apply AA-BOND EP30AN completely mixed adhesive to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds; however, maintain contact until adhesive is completely

cured.

3. Some separation of components is common during

shipping and storage. For this reason, it is recommended

that the contents of the shipping container be thoroughly mixed prior to use.

4. Some ingredients in this formulation provided may crystallize when subjected to low temperature storage. A gentle warming cycle of 52°C for 30 minutes prior to mixing components may be necessary. Crystallized epoxy components do not react as well as liquid components and should be re-dissolved prior to use for best result.

AVAILABILITY:

This epoxy can be supplied in many different packages.


Data Sheets: TDS | MSDS available upon request.


Write a review

Note: HTML is not translated!




Designed By TechBowie
AtomAdhesives © 2019
Live Chat