Welcome visitor you can login or create an account.

Contact Atom Adhesives toll free (888) 522-6742

AA-BOND 2116 Low Vapor Pressure, Epoxy Staking Compound, 2 Part, Passes NASAs Outgassing

AA-BOND 2116 Low Vapor Pressure, Epoxy Staking Compound, 2 Part, Passes NASAs Outgassing
Product Code: AA-BOND 2116
Availability: In Stock
This product has a minimum quantity of 1


Click here for printer friendly version.


Technical Product Bulletin

LOW VAPOR PRESSURE EPOXY STAKING COMPOUND


PRODUCT DESCRIPTION:

AA-BOND 2116 is a thixotropic, low vapor pressure epoxy system that passes the NASA Outgassing Specification. It is recommended for critical electronics, aerospace, and industrial applications where a high-fill, non-sag reliable adhesive is required for bonding and enhancing the mechanical and structural rigidity of assemblies.

AA-BOND 2116 is two-part, solvent-free compound is readily mixed, handled, used, and cured at room temperature, and develops strong bonds to most clean, dry material surfaces including metals, glass, ceramics, wood and many plastics.

AA-BOND 2116 bonds provide electrical insulation and excellent resistance to weather, galvanic action, petroleum solvents and lubricants, gasoline, jet fuels, alcohol, salts, and mild acids and alkalis.

GENERAL PROPERTIES

Appearance Milky translucent
Cure Type Room temperature or Heat Cure
Benefits Passes NASA's Outgassing/Low Outgassing
Solvent free
Weather resistant
Mix Ratio by weight 100:22.5 / Resin:Hardener
Substrates Ceramics, glass to glass, fabrics, metals, laminates and other composite materials
Operating Temperature -60 to 130 °C
Typical Application critical electronics, aerospace, and industrial applications where a high-fill, non-sag reliable adhesive is required for bonding and enhancing the mechanical and structural rigidity of assemblies

UNCURED PROPERTIES:

Specific Gravity 1.25
Reactive solids contents, % 100
Pot Life 30 minutes
Viscosity 100,000

CURE SCHEDULE:

4 hours @ 65°C
24 hours @ 25°C

MISC PROPERTIES:

Volume Resistivity 6.00e+13 ohm-cm
Dielectric Constant 4.5
Dielectric Strength 410 kV/mil
Hardness, Shore D 88

GENERAL INFORMATION:

For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS).

HOW TO USE:

1) Carefully clean and dry all surfaces to be bonded.

2) Apply this completely mixed adhesive to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds; however, maintain contact until adhesive is completely cured.

3) Some separation of components is common during shipping and storage. For this reason, it is recommended that the contents of the shipping container be thoroughly mixed prior to use.

4) Some ingredients in this formulation provided may crystallize when subjected to low temperature storage. A gentle warming cycle of 52°C for 30 minutes prior to mixing components may be necessary. Crystallized epoxy components do not react as well as liquid components and should be re-dissolved prior to use for best results.

AVAILABILITY:

This epoxy can be supplied in various different packages.

Data Sheets: TDS | MSDS available upon request.


Write a review

Note: HTML is not translated!




Designed By TechBowie
AtomAdhesives © 2019
Live Chat