Welcome visitor you can login or create an account.

Contact Atom Adhesives toll free (888) 522-6742

AA-BOND 2103 Low Vapor Pressure, Medium Viscosity, Room Temperature Cure (24hr)

AA-BOND 2103 Low Vapor Pressure, Medium Viscosity, Room Temperature Cure (24hr)
Product Code: AA-BOND 2103
Availability: In Stock
This product has a minimum quantity of 1


Click here for printer friendly version.

MEDIUM VISCOSITY / LOW VAPOR PRESSURE EPOXY ADHESIVE


PRODUCT DESCRIPTION:

AA-BOND 2103 is a clear, near transparent, medium viscosity epoxy adhesive formulation developed for rigid laminating, sealing and bonding applications where the combination of good wetting and improved mechanical electrical properties is required.

AA-BOND 2103 is two-part liquid epoxy adhesive contains no solvents and is easy to mix, use and apply at room temperature.

AA-BOND 2103 develops strong, rigid, high performance bonds to itself and to ceramics, glass and glass fabrics, metals, laminates and other composite materials, forestry and masonry products, and to most rigid plastics.

AA-BOND 2103 is an effective electrical insulator, and further provides excellent resistance to weather, galvanic action, vapors, JP4 fuel, gasoline, lubricants and other petroleum products, mild acids and alkalis, salts, and other organic and inorganic compounds.

GENERAL PROPERTIES

Appearance Slight haze/Clear
Cure Type Room temperature or Heat Cure
Benefits Good wetting
Great mechanical properties
Great electrical properties
Solvent free
Easy mix and apply
Mix Ratio by weight 100:25 / Resin:Hardener
Substrates Ceramics, glass to glass, fabrics, metals, laminates and other composite materials
Operating Temperature -60 to 125 °C
Typical Application rigid laminating, sealing and bonding applications where the combination of good wetting and improved mechanical electrical properties is required.

UNCURED PROPERTIES:

Specific Gravity 1.2
Reactive solids contents, % 100
Pot Life 20 minutes

CURE SCHEDULE:

4 hours @ 65°C
24 hours @ 25°C

MISC PROPERTIES:

Volume Resistivity 6.00e+13 ohm-cm
Dielectric Constant 4.1
Dielectric Strength 420 kV/in
Hardness, Shore D 85

GENERAL INFORMATION:

For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS).

HOW TO USE:

1) Carefully clean and dry all surfaces to be bonded.

2) Apply AA-BOND 2103 is completely mixed adhesive to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds; however, maintain contact until adhesive is completely cured.

3) Some separation of components is common during shipping and storage. For this reason, it is recommended that the contents of the shipping container be thoroughly mixed prior to use.

4) Some ingredients in this formulation provided may crystallize when subjected to low temperature storage. A gentle warming cycle of 52°C for 30 minutes prior to mixing components may be necessary. Crystallized epoxy components do not react as well as liquid components and should be re-dissolved prior to use for best results.

AVAILABILITY:

This epoxy can be supplied in various different packages.

Data Sheets: TDS | MSDS available upon request.


Write a review

Note: HTML is not translated!




Designed By TechBowie
AtomAdhesives © 2019
Live Chat