AA-BOND 2101 is a clear medium viscosity epoxy formulation recommended for laminating, bonding, repair and other adhesive applications where the combination of superior structural, mechanical and electrical performance properties are required.
AA-BOND 2101 easily mixes and cures at room temperature, and develops strong, durable, tough bonds to most clean, dry material surfaces.
The fully cured AA-BOND 2101 bonds are great electrical insulators which also provide excellent resistance to weather, galvanic action, many mild acids and alkalis, salt solution, petroleum solvents, lubricating oil, gasoline, jet fuels, alcohol, and many other organic and inorganic materials.
Room temperature or Heat Cure
Resistant to many organics/inorganics
Strong bond strength
Mix Ratio by weight
100:25 / Resin:Hardener
Metals, ceramics, glass, glass fabrics, wood leather and rigid plastics
-60 to 135 °C
laminating, bonding, repair and other adhesive applications where the combination of superior structural, mechanical and electrical performance properties are required.
Viscosity @ 25 °C
18500 cPs ±1000
Specific Gravity, mixed
Glass Transition Temp, Tg
Hardness, Shore D
3300 psi (Alum to Alum)
4.3@Frequency 1000 Hz
For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS).
HOW TO USE:
1) Carefully clean and dry all surfaces to be bonded.
2) Apply AA-BOND 2101 mixed adhesive to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds; however, maintain contact until adhesive is completely cured.
3) Some separation of components is common during shipping and storage. For this reason, it is recommended that the contents of the shipping container be thoroughly mixed prior to use.
4) Some ingredients in this formulation provided may crystallize when subjected to low temperature storage. A gentle warming cycle of 52°C for 30 minutes prior to mixing components may be necessary. Crystallized epoxy components do not react as well as liquid components and should be re-dissolved prior to use for best results.
This epoxy can be supplied in various different packages.