Welcome visitor you can login or create an account.

Contact Atom Adhesives toll free (888) 522-6742

AA-BOND FS227 Thixotropic Polymer Epoxy Polyamide

AA-BOND FS227 Thixotropic Polymer Epoxy Polyamide
Product Code: AA-BOND FS227
Availability: In Stock
This product has a minimum quantity of 1


Click here for printer friendly version.



Technical Product Bulletin

THIXOTROPIC EPOXY/POLYAMIDE ADHESIVE


PRODUCT DESCRIPTION:

AA-BOND FS227 is a thixotropic polymer epoxy/polyamide system developed for industrial adhesive and sealing applications where the combination of high fill, easy handling, good wetting, toughness, and superior mechanical properties are required.

GENERAL PROPERTIES

Appearance Amber
Cure Type Heat cure or Room temperature
Benefits High fill
Easy handling
Good wetting
Toughness
High temp
Fast cure
Low viscosity
Operating Temperature -60 to 110 °C
Substrates Most material surfaces, including many metals, rigid plastics, glass, ceramics, leather, rubber, wood and concrete

UNCURED PROPERTIES:

Viscosity @ 25 °C 650
Specific Gravity, mixed 1.12 g/cc
Pot Life 75 minutes

CURE SCHEDULE:

4 hours @ 65°C
24 hours @ 25°C

CURED PROPERTIES:

Volume Resistivity 1.20e+14 ohm-cm
Dielectric Strength 460 volts/mil
Glass Transition Temp, Tg 70°C
Dielectric Constant 3.35 @ Frequency 1000 Hz
Hardness, Shore D 75
Lap shear 2500 psi (Alum to Alum)

GENERAL INFORMATION:

For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS).

HOW TO USE:

1) Carefully clean and dry all surfaces to be bonded.

2) Apply the AA-BOND FS227 mixed adhesive to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds; however, maintain contact until adhesive is completely cured.

3) Some separation of components is common during shipping and storage. For this reason, it is recommended that the contents of the shipping container be thoroughly mixed prior to use.

4) Some ingredients in this formulation provided may crystallize when subjected to low temperature storage. A gentle warming cycle of 52°C for 30 minutes prior to mixing components may be necessary. Crystallized epoxy components do not react as well as liquid components and should be re-dissolved prior to use for best results.

AVAILABILITY:

This epoxy can be supplied in various different packages.

Data Sheets: TDS | MSDS available upon request.


Write a review

Note: HTML is not translated!




Designed By TechBowie
AtomAdhesives © 2018
Live Chat