AA-BOND FDA26 is Versatile adhesive guaranteed a high strength bond.
AA‐BOND FDA26 is two part adhesive used and cured at room temperature for bonding, repair applications by manufacturers of food preparation, processing and packaging equipment and devices.
Heat cure or Room temperature
High shear and peel strength
Heat and impact resistant
Handy duo-pack cartridges for easy mixing
Mix Ratio by weight
Most metals, ceramic, glass and plastics
-60 to 135 °C
Viscosity @ 25 °C, cps
17,500 ±1000 @ temperature 77 °F, 25 °C
Specific Gravity, mixed
Reactive solids contents, %
Adhesive Bond Strength, psi
2120 ( 1 hr @ 65°C)
2190 (24 hrs @ 25°C)
Hardness, Shore D
86 (24 HR @ 25°C)
90 (1 hr @ 65°C)
Glass transition temperature (Tg)
113°C, 235 °F
For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS).
HOW TO USE:
1) Carefully clean and dry all surfaces to be bonded.
2) Apply AA-BOND FDA26 completely mixed adhesive to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds; however, maintain contact until adhesive is completely cured.
3) Some separation of components is common during shipping and storage. For this reason, it is recommended that the contents of the shipping container be thoroughly mixed prior to use.
4) Some ingredients in this formulation provided may crystallize when subjected to low temperature storage. A gentle warming cycle of 52°C for 30 minutes prior to mixing components may be necessary. Crystallized epoxy components do not react as well as liquid components and should be re-dissolved prior to use for best results.
This epoxy can be supplied in various different packages.