Welcome visitor you can login or create an account.

Contact Atom Adhesives toll free (888) 522-6742

AA-BOND F110 Transparent, Epoxy Adhesive, Rigid, Clear, Low Viscosity, Room Temperature Cure

AA-BOND F110 Transparent, Epoxy Adhesive, Rigid, Clear, Low Viscosity, Room Temperature Cure
Product Code: AA-BOND F110
Availability: In Stock
This product has a minimum quantity of 1


Click here for printer friendly version.


Technical Product Bulletin

OPTICALLY TRANSPARENT LOW VISCOSITY EPOXY ADHESIVE


PRODUCT DESCRIPTION:

AA-BOND F110 is a rigid, optically clear adhesive with a very low viscosity.

AA-BOND F110 is room temperature system an excellent choice for thin bond-line assembly and repair applications of prisms, lenses and other optic components. And its high strength makes this epoxy ideal for structural applications.

AA-BOND F110 exhibits excellent wetting and wicking capabilities which allows it to adhere strongly to glass, ceramics, metals and most rigid plastics.

GENERAL PROPERTIES

Appearance Transparent, clear
Cure Type Room temperature or Heat cure
Benefits High strength
Perfect insulative properties
Good resistance to salt solutions, mild acids and Alkalis and many other chemicals
Mix Ratio by weight 100:11 / Resin:Hardener
Operating Temperature -60 to 130 °C
Typical Applications Exhibits excellent wetting and wicking capabilities which allows it to adhere strongly to glass, ceramics, metals and most rigid plastics.
Volume Resistivity 6.00e+13 ohm-cm

UNCURED PROPERTIES:

Viscosity @ 25 °C 310
Thixotropic Index 1.0
Specific Gravity, mixed 1.16
Reactive solids contents, % 100
Pot Life 30 minutes

CURE SCHEDULE:

5 minutes @ 100°C
2 minutes @ 120°C
1 minute @ 150°C

CURED PROPERTIES:

Glass transition temperature (Tg), °C 90
Hardness, Shore D 83
Refractive Index 1.54
Lap shear strength, psi 2150 (alum to alum, 24 hrs @ 25°C)
2600 (alum to alum, 1 hr @ 65°C)
3000( alum to alum, 4 hrs @ 65°C)
Dielectric Constant 4.3 @ Frequency 1000 Hz
Dielectric Strength 16.1 kV/mm 410 kV/in

GENERAL INFORMATION:

For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS).

HOW TO USE:

1) Carefully clean and dry all surfaces to be bonded.

2) Apply AA-BOND F110 completely mixed adhesive to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds; however, maintain contact until adhesive is completely cured.

3) Some separation of components is common during shipping and storage. For this reason, it is recommended that the contents of the shipping container be thoroughly mixed prior to use.

4) Some ingredients in this formulation provided may crystallize when subjected to low temperature storage. A gentle warming cycle of 52°C for 30 minutes prior to mixing components may be necessary. Crystallized epoxy components do not react as well as liquid components and should be re-dissolved prior to use for best results.

AVAILABILITY:

This epoxy can be supplied in various different packages.

Data Sheets: TDS | MSDS available upon request.


Write a review

Note: HTML is not translated!




Designed By TechBowie
AtomAdhesives © 2018
Live Chat