AA-DUCT AD1 Low Cost, One Part Heat Dry Electrically Conductive, Silver Epoxy Adhesive

$16.99 - $1,099.99
SKU:
AA-DUCT AD1

Technical Product Bulletin

ELECTRICALLY CONDUCTIVE ONE PART LOW COST EPOXY


 

PRODUCT DESCRIPTION:

AA-DUCT AD1 is a single component epoxy, formulated with pure silver powder combined with organic binders and solvents to produce electrically conductive paths, films or patterns over non-conductive substrates.

AA-DUCT AD1 shows slight settling when stored for a long period of time, no caking and will re disperse to a smooth homogeneous state.

AA-DUCT AD1 formulation produces electrically conductive paths on a wide variety of surfaces including plastics, rubber, cloth, thermoplastic, paper, wood and many others.

AA-DUCT AD1 designed for use in diversified applications as microwave EMI & RFI shielding, in the assembly or repair of printed circuit boards, wave-guides, electronic modules, flat cable, static shielding, connections, and circuitry.

PRODUCT PROPERTIES:

Appearance Silver
Cure Type Heat cure
Benefits High strength
Perfect bond
EMI & RFI shielding
Wave guides
Substrates Excellent choice for Integrated Circuits, aluminum, copper, magnesium, steel, bronze, nickel, kovar, ceramic, glass, phenolic and G-10 epoxy glass boards.
Catalyst Anhydride
Hardness, Shore D 83
Typical Applications microwave EMI & RFI shielding, in the assembly or repair of printed circuit boards, wave-guides, electronic modules, flat cable, static shielding, connections, and circuitry.

UNCURED PROPERTIES:

Viscosity @ 25 °C cps 6,800
Density gm/cc 2.35
Silver , % 70-72
Shelf life 6 Months
Operating Temperature -45°C to 170°C
Pot Life @ 25 °C 6 months @ 25°C
9 months refrigerated

CURE SCHEDULE:

60 min @ 120°C, 248°F
30 mins @ 150°C, 302°F
10 mins @ 175°C, 347°F

PHYSICAL CHARACTERISTICS:

Sheet Resistivity 10-12 mΩ/sq
Bulk Resistivity 3x10-5Ω/cm
Adhesion Tensile Strength 1000 N/cm2 (1500 lb/in2)
Lap shear Strength 1400 N/cm2 (2000 lb/in2)
Thermal Conductivity 0.04J/(cm.s. °C):[0.01cal/(cm.s. °C)]
Specific heat 0.30J/(g. °C) :[0.07 cal/g. °C]
Coefficient of Thermal Expansion 3x10-5 (m/m)/ °C
Modulus of elasticity: 4x10+10(4*10 power of +10) Pa (6x105lb/in2)

GENERAL INFORMATION:

For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS).

HOW TO USE:

1) Carefully clean and dry all surfaces to be bonded.

2) Apply AA-DUCT AD1 completely mixed adhesive to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds; however, maintain contact until adhesive is completely cured.

3) Some separation of components is common during shipping and storage. For this reason, it is recommended that the contents of the shipping container be thoroughly mixed prior to use.

4) Some ingredients in this formulation provided may crystallize when subjected to low temperature storage. A gentle warming cycle of 52°C for 30 minutes prior to mixing components may be necessary. Crystallized epoxy components do not react as well as liquid components and should be re-dissolved prior to use for best results.

AVAILABILITY:

This epoxy can be supplied in various different packages.

Data Sheets: TDS | MSDS available upon request.

Atom Adhesives
Typically replies within an hour

Atom Adhesives
Hi there 👋

How can I help you?
1:40
×
Chat with Us